On sale at PSA. Upper without BCG or CH in 5.56 with target crown for $299 normally $499.
Announcement
Collapse
No announcement yet.
What do you think of this upper for a NY compliant competition rifle?
Collapse
X
-
What do you think of this upper for a NY compliant competition rifle?
<p>Barrel Length: 16"<br />Gas System: Carbine-length<br />Barrel Profile: A2 Style <br />Barrel Steel: Chrome Moly<br />Barrel Finish: Phosphate<br />Chrome Lining: None<br />Muzzle Thread: None<br />Chamber: 5.56 NATO<br />Twist Rate: 1 in 7"<br />BarreLast edited by Calculon; 01-02-2016, 04:39 PM.Ok I can go a couple waysTags: None
-
IMO a cheap product for a cheap price. No forward assist, chrome, etc.... bottom of the barrel kind of setup.
Keep in mind palmetto do not make the products they are retailer and they sell some good stuff but also a lot of crap. Hit and miss sort of deals.
An decent upper with a decent barrel and proper receiver and budget handguard will not be a lot more.
Even if you spend 100 or 200 more, what is that compared to all the ammo you are going to put through it. Also something that might run better, more accurate and will last longer.
What kind of competition anyway?
It is a shame when people demanding tolerance, have no tolerance
- 2 likes
-
Thinking about getting into 3 Gun in spring. Would like to start planning something now so I can acquire it piece at a time. At this point I'm wide open to suggestions on build but don't want to go crazy expensive. I have a stripped lower waiting so I'm at square one.Ok I can go a couple ways
Comment
-
some ideas...
If you are going to do 3 gun I would start with a quality 3 gun barrel that will be more accurate than a chrome barrel and will last more than twice anyway...
http://ar15performance.com/inc/sdetail/11562/32764
9310 super bolt matched to that barrel...
http://ar15performance.com/inc/sdetail/3255/29257
This upper will work just fine...
http://www.surplusammo.com/STP1-T-A-F-D-C/
Great handguard for the money...
http://www.chandlerhardwoods.com/product-p/ar15-15v.htm
BTE gas block. very nice cuts and fit...
http://www.bte-usa.com/#!bte-micro-gas-blocks/c1du
It is a shame when people demanding tolerance, have no tolerance
- 1 like
Comment
-
This is the article that got me thinking.Three-gun is one of the most addictive competitive shooting sports, and requires quality equipment.Ok I can go a couple ways
Comment
-
Originally posted by Calculon View PostThis is the article that got me thinking.
The shell is not important. The internals is what matters the most. A good barrel, block and the bolt and carrier that are the beating heart of the AR.
Trigger group too to what you like. I have mine setup anyway from 2 to 3.5 lbs depending on use.
It is a shame when people demanding tolerance, have no tolerance
- 1 like
Comment
-
Originally posted by Meketrefe View Postsome ideas...
If you are going to do 3 gun I would start with a quality 3 gun barrel that will be more accurate than a chrome barrel and will last more than twice anyway...
http://ar15performance.com/inc/sdetail/11562/32764
9310 super bolt matched to that barrel...
http://ar15performance.com/inc/sdetail/3255/29257
This upper will work just fine...
http://www.surplusammo.com/STP1-T-A-F-D-C/
Great handguard for the money...
http://www.chandlerhardwoods.com/product-p/ar15-15v.htm
BTE gas block. very nice cuts and fit...
http://www.bte-usa.com/#!bte-micro-gas-blocks/c1duOk I can go a couple ways
Comment
-
OK what about stock options? I hate the fact that we have to use these ridiculous "compliant" solutions but until I move to free America I don't want to be looking over my shoulder every time I use the rifle. The 3 main options seem to be the Thordsen, Exile Machine and MonsterMan solutions. Currently using the AR spur which I don't like. Since the others are all butt ugly, I figure I should look to function over form. Any experience with them? What do you love/hate?
Thordsen
Thordsen FRS15.jpg
Exile Machine 1
ExileMachine1.JPG
Exile Machine 2
ExileMachine2.JPG
MonsterMan
MonsterMan.jpgOk I can go a couple ways
Comment
-
No experience with Exile but can say that MonsterMan kinds sucks (definitely need ambi safety), Spur blows (even with the Patriot trigger guard finger hooky thing), the most functional (but butt-ugly fugliest) is the Thordsen FRS (fukking retarded stock). God I hate this state!Beer is like porn, you can buy it but it's more fun to make your own
I have to bend over too far
I get a boner.
bareback every couple of days, GTG. Bareback, brokeback, same $hit!
I joined a support group to help me deal with my social anxiety but I just can't seem to work up the nerve to go to a meeting......
- 1 like
Comment
-
...and for what it's worth, none of the above have actually been officially approved as "NY compliant". Did I mention I hate this goddam state?Beer is like porn, you can buy it but it's more fun to make your own
I have to bend over too far
I get a boner.
bareback every couple of days, GTG. Bareback, brokeback, same $hit!
I joined a support group to help me deal with my social anxiety but I just can't seem to work up the nerve to go to a meeting......
- 1 like
Comment
-
The monster man is not even an option. I don't know what that is supposed to be and see it as an accident waiting to happen.
The spur is also another useless option in practical terms imo.
The exile can work but in needs to be rebated a tad specially for people with small hands.
The FRS I don't see any problems with it. It looks funny but it actually works great.It is not better nor worse than a rifle grip and the stock is in line with the bore as originally intended.
There are other options too.
It is a shame when people demanding tolerance, have no tolerance
- 1 like
Comment
Comment