Gm gdi

[Norm Deguerre x2]

Question for Dave ,????
what is a good way to get the fuel rail loose
On a GM 8 ??
I am concerned that I will bend the tubing, it is pretty tight

[Norm Deguerre x2]

Cats Paw ????

[WARFAB]

Gotta tag dwa12479 for these questions.

[Norm Deguerre x2]

I have always looked at this as DWI12479. ????????????????
??????

[Norm Deguerre x2]

WTF
smilies do not work anymore

[thughes]

paging dwa12479

[usmcveteran]

[Norm Deguerre x2]

Damm phone. ????

[usmcveteran]

Damm phone. ????

You just.l can't use the phones smiley faces because website doesn't recognize them. You can use smiley faces that forum has programmed in like I did and those work.

[usmcveteran]

[WARFAB]

You just.l can't use the phones smiley faces because website doesn't recognize them. You can use smiley faces that forum has programmed in like I did and those work.

Now I'm just chuckling to myself imagining how Norm's text message conversations are full of smiley faces and emojis.

[Norm Deguerre x2]

Here is what I have

[usmcveteran]

Huh, I can give the advice I always hate to hear..... Have you tried a different browser on your phone and have you tried clearing cache and cookies?

[WARFAB]

You are qualified to answer 90% of the questions an IT department gets.

[dwa12479]

I usually will spray a little silicone spray down around the base of all the injectors and let it sit for a a few minutes. Use a blow gun to blast all the crap away so it doesn't fall in the intake, wiggle the whole rail assembly around for a bit, and then very gently use a pry bar to work them up and out little by little. Watch out for the o-rings on the end, often times the injector will actually come out of the o-ring and it'll be stuck in the intake.

[dwa12479]

What year make and model?