Announcement

Collapse
No announcement yet.

Models and supplies

Collapse
This topic is closed.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • DONE

    Models and supplies

    Hello everyone,I decided that I am going to get out of Model building so I am selling all the models and supplies I have left,I want to selling everything as I am getting back in to summer fishing and I also want to get back in to ice fishing and I also want to start buying some more fishing gear..I have decide to hold off on buying a bigger boat as I want something bigger like a 17 to 18 foot boat,so for the time being I be using my smaller 14 foot aluminum boat for the time being and the Johnson 5.5hp motor that Cgrutt was so nice of him to give me,by the way Chicken Shoot and Cgrutt,I am having the motor tuned up along with having the carburetor cleaned totally clean as it really needs it as it was pretty gummed up,I will tell you this much the motor did start up but only if you spray gas into the carburetor but would not stay running so it is getting a good cleaning and tune up..

    Here is a break down of what I have with some prices,I am will do better on all the prices I have listed if anyone is interested,I have a lot tied up on everything but I do my best to make you a good deal if you want to buy everything all at once,I have not included any shipping on any of the items I have listed..

    Moebius Models 35th Anniversary Battlestar Galactica Colonial Viper 1:32 $25.00

    Battlestar Galactica Revel Monogram 85-3618 $40.00

    AMT Star Trek U.S.S. Enterprise Bridge Set AMT808/12 $21.00

    AMT Star Trek U.S.S. Enterprise NCC-1701-E 1:4000 $23.00

    Polar Lights Forbidden Planet C-57D Space Cruiser $23.00

    AMT Star Trek The Next Generation U.S.S. Enterprise 6619 $30.00

    Monogram Star Trek Voyager Maquis Ship 3605 $30.00

    AMT Star Trek Deep Space Nine U.S.S. Defiant NX-74205 1:420 $23.00

    Martian War Machine 1/35 Resin Kit $40.00

    AMT Star Trek The Motion Picture Klingon Cruiser S971 $24.00

    Trek Modelers Complete Lighting Kit for the 1:350 Enterprise $210.00

    Decal set for Paragrafix Photoetch NX-01 PGX176 #D011 I paid $14.00

    1:350 Refit Photoetch For Polar Lights 4204 & POL808 AND p/n #PGX111 $33.00

    1:350 Refit Photoetch Supplemental Set for Polar Lights # 4204 & POL808 p/n #PGX166 $11.00

    NX-01 Enterprise Photoetch Set for Polar Lights kit# POL902/04 p/n PGX176 $26.00

    TOS Viper Photoetch Set p/n PGX175 $19.00

    3 Bottles Of Micro Kristal Klear $4.00 each

    1 X-ACTO Z Series knife $4.00

    2 X-ACTO Z Series 5 blade pack $3.00 each

    2 Testors Hobby Knife $1.00 each

    1 Model Expo Precision 6 piece stainless miniature chisel set $11.00

    1 Xuron Corp 440 High Precision Scissor Photo Etch Scissor $12.00

    1 Excel Kelly Forceps Straight 5 1/2 $4.00

    1 Tamiya Craft Tools 104 Basic File Set smooth double cut $4.00

    2 Bottles of Liquitex Pro Flow Aid 4 floz $4.00 each

    1 Bottle of Golden Artist Colors 8oz Medium Arcrylic Retarder $9.00

    1 Zona curved point cutter $4.00

    1 Kemper Pro Needle $3.00

    1 bag of 10 mini spring clamps $5.00

    2 J-B Weld 8237 PlasticWeld Plastic Repair Expoxy Putty - 2oz $4.00 each

    1 Golden Atrist Colors 4oz Medium Acrylic Retarder $4.00

    2 Dremel Precision Drill set 7 piece 628-03 $6.00 each

    CML Supply Mini Micro Drill Bit Set and Pin Vise chuck 31 piece $10.00

    2 Plastruct TBFS-8 Round Tubing 1/4 (7) $5.00 each

    1 Mini 0.5 K3 HVLP Gravity Feed Paint Spray Gun Airbrush $10.00

    1 Dremel A577 Detailers Grip $9.00

    1 box of Creative Colors 12 Color Illustrator Airbrush Paint set 2oz bottles $30.00

    1 Master Airbrush 100 eyedroppers for liquid transfer $10.00

    1 Brad Hair 1/32 TOS Cylon Raider Canopy $6.00

    2 Braid Hair 1/32 TOS Cylon Raider Cockpits Resin $10.00 each

    1 roll of signal density white led strip lights $9.00

    3 bottles containing 10 jewelers mini steel twist drill bits,.75mm drills $3.00 each

    1 Createx Colors 36 Color Airbrush Paint Set with, Cleaner & Mixing Cups, 2 oz. Bottles $60.00

    Evanslighting JJ Star Trek Enterprise Into Darkness Lighting kit,I am looking for $150.00

    VooDooFX Battlestar Galactica VMK1LK-1 Lighting kit $25.00

    Lifelites eLite Basic Kit for Lego kits,I have 8 of these I am looking to get $15.00 for each kit..These are great for those of you out there who have kids who like build lego kits and want to give there Lego some lighting effects..

    Here is a link to the Lifelites I have for sale..

    http://lifelites.com/products/132


    My form of payment I will take will be PayPal as gift...

    Here is a picture of the models I have I am selling,







    Last edited by DarthVader; 08-23-2015, 10:59 PM.
    I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

  • #2
    Bump I am opened to offers on certain models I have for sale..
    I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

    Comment


    • #3
      Bump..
      I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

      Comment


      • #4
        Bump.
        I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

        Comment


        • #5
          Bump any of these models would be a great hobby for your kids to build...

          Clarence
          I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

          Comment


          • #6
            How many Battlestar models are there?
            I dip my bullets in bacon grease.

            Comment


            • #7
              Originally posted by Brendan2904 View Post
              How many Battlestar models are there?
              Brendan I have to double check tomorrow for you as I think I have around 6 or 7 Battlestar models,some of them I for got to list as I am sure I have 1 or 2 Vipers..I know right now I have 2 Battlestar Galactic ships and 2 Cylon Raiders,I also have TOS Viper Photoetch Set which is for the Viper model,I also have this for the raiders,1 Brad Hair 1/32 TOS Cylon Raider Canopy
              and 2 Braid Hair 1/32 TOS Cylon Raider Cockpits Resin..

              Clarence
              I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

              Comment


              • #8
                Ok. I will check with my buddy he is a big Battlestar fan.
                I dip my bullets in bacon grease.

                Comment


                • #9
                  Ok and I let know what I have tomorrow..
                  I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

                  Comment


                  • #10
                    Originally posted by Brendan2904 View Post
                    Ok. I will check with my buddy he is a big Battlestar fan.
                    Hello Brendan,

                    Here is what I have for Battlestar models for you..I have a total of 5 models..

                    Here is the prices of each one not counting any shipping..

                    Moebius Models 35th Anniversary Battlestar Galactica Colonial Viper 1:32 $25.00

                    Battlestar Galactica Revel Monogram 85-3618 $40.00

                    Moebius Battlestar Galactica Original Cylon Raider 1/32 scale $40.00

                    Moebius Battlestar Galactica 1:4105 $40.00

                    Revel Battlestar Galactica Cylon Raider $40.00

                    Here is also a parts list that can be used to modify the models and help improve the look of the model..

                    1 Brad Hair 1/32 TOS Cylon Raider Canopy $6.00
                    2 Braid Hair 1/32 TOS Cylon Raider Cockpits Resin $10.00 each

                    TOS Viper Photoetch Set p/n PGX175 $19.00




                    I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

                    Comment


                    • #11
                      Talked to my buddy. He said he was forbidden to buy anything. Sorry. Good luck with the sale. Nice stuff.
                      I dip my bullets in bacon grease.

                      Comment


                      • #12
                        Bump..
                        I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

                        Comment


                        • #13
                          Wish I was into models, think I bought a B-29 or something model as kid and half built it.
                          www.AvidArms.com I'm STIHL out of conditioner!!
                          Finally joined the ranks of broke homeowner
                          Am I short stroking or going to fast?

                          I know he has a bush

                          Comment


                          • #14
                            Originally posted by usmcveteran View Post
                            Wish I was into models, think I bought a B-29 or something model as kid and half built it.
                            I hear you there USMC,I was into building them but I am no longer interested,so I just want to sell everything and get back in to fishing,so I am selling everything to get more summer and ice fishing gear and with Winter approaching I need the gear for ice fishing right now,I do have a little bit of ice fishing gear but no where enough to even get started on the ice,I still need to buy a rod,lures,auger and a shanty which I know the Shanty and Auger will be the most expensive to get yet..I really need to get a Power Auger since I know a hand Auger will not do help me any good especially with the way the back is..

                            I have everything listed in other places but just am not getting any hits let,It is like the Hitachi air nailer I have which I am surprised no one has jumped on yet...That would be great for someone who builds shelves,book cases,or any type of wood crafting..

                            Clarence
                            I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

                            Comment


                            • #15
                              Bump, I am open to offers if anyone would buy a bundle package..
                              I could probably could get away with a 52 inch shaft but if I could get a 54 inch shaft that would be great as I could always adjust the length of the shaft

                              Comment

                              Working...
                              X